INTERIOR SOLUTIONS
AGS - SYSTEMS
Minimal Door Frames
Millwork Shadowgap Systems
Baseboards Systems
THEINVISIBLETOOLBOX is proudly partnered with AGS-systems of Italy, as the manufacturers exclusive distributor to Canada.
The solutions from AGS-systems are world acclaimed amongst professionals as best and preferred modern finishing solutions. Design with confidence, for fine finish lines using carefully thought systems. Engineered to secure durable crisp lines, yet easy to detail and simple to install. To learn about AGS-systems, review them in Our Brands section. To learn about the technical & design aspects of their solutions, review the information on this page, and the detailed product pages.
​
We provide sales and technical support for AGS-systems products to: Architects, Millwork fabricators, Private clients & select retailers.
Additionally we undertake complete interior door contracts
DOOR
SOLUTIONS
TCS Trimless Flush Door
TL & ASR Shadowgap Systems
Unless noted otherwise, Photos by the THEINVISIBLETOOLBOX
TP Flush Framed Door & ASR Shadowgaps
TCS Trimless Flush Door
The construction of durable frameless details &
fine shadow
lines
Starts
with precise
design specification
for the use of potent tools
TCS Trimless Flush Door
TO DISCOVER THE POWER PRINCIPALS
DRIVING AGS-SYSTEMS SOLUTIONS
SEE DIAGRAMS BELOW
AGS-SYSTEMS | FRAMES OVERVIEW
The above slides are intended for general overview, served per an introductory reference only.
Refer to each profiles official data sheet for any frame specifics and details.
Further, we are available for technical support and questions to address any project specific questions and details.
AGS OPEN VS CLOSED SYSTEMS
AXONOMETRIC VIEW
​
- HOVER OVER IMAGE FOR MORE..
NEXT -
OPEN EXTRUSIONS
CLOSED
Extrusion
E
R
Integrated Reinf'-Mesh
J
Metal
H.W. Jamb
Machined at factory
B
Milled
for simplified
baseboard install
For precision, durability &
predetermined construction..
OPEN
Extrusion
E
R
Integrated Reinf'-Mesh
J
MillWork
H.W. Jamb
Machined with slab. Installed later.
B
Milled for
simplified
baseboard install
For creative design &
flexibility in construction..
AGS-SYSTEMS PRODUCTS
Downloads
Contacts
Select your frame or relevant profile type from the product grid below to view it in a detailed product page.
Alternately, use the product selection filter system, to identify the relevant options for your project.
If you can not find exactly the frame or shadowgap solution you are looking for, please get in touch!
We are looking forward to be of service.
​
​
​
Terms of Use
The user of this informative section agrees to the Terms of Use by THEINVISIBLETOOLBOX.
It is acknowledged by the user that the information is general, and does not necessarily reflect all specifics, or any relevant matter pertaining to a specific door frame, or a specific product scenario in any particular project.
The manufacturers and THEINVISIBLETOOLXOB may change any product specifications at any time as may be necessary.
Information is given based on its availability from AGS-systems, other manufacturers, as well as best knowledge and experience by THEINVISIBLETOOLBOX. While we strive to keep this resource up-to-date, there remains a possibility for inaccuracies due to various circumstance of changes introduced by manufacturers and other conditions.
​
Finally, where you are enquiring for a specific solution, you are advised that the information below is generalized, and may not necessarily address the specific requirements of your project. For specific projects, please contact us with the relevant information for a comprehensive review and recommendations. The technical information published by the manufacturers, and by THEINVISIBLETOOLBOX addressing any specific enquiry or product order - Supersedes any general information conveyed below.
System Selection Filters
Primary Selection Set
Main Type SelecHighlight to include in the listed systems
Secondary Selection Set
Frames and Gap Liner Features Selectors - Check to Include
Help Section - Hover Over the i & See Help Notes here
For the grid to produce search results, each category of filter selectors must have at lease one option selected.
Please note that our individual product pages are being upgraded for additional content.
​
In the mean time, all relevant information is accessible via the product card grid below. Hover over areas for Rough Opening requirements, and for additional documentation.
​
Where you are missing any information, please contact us for assistance.
Terms of Use Confirmation
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order. Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
2200 X 1100, Total Ext Frame Length.
2750 X 1100, Total Ext Frame Length.
2750 X 1000 Total Ext Frame Length. No Top Frame Profile.
Kits Include: Bottom cuts, Miter Corner Cuts where top frame is included, Protective Film over rough alum' extrusions, Miter 90 Angle Lock Frame Connectors, Brackets (6-8 per size), Spreader-Bar, 90 Angle Corner Hold, Integrated Mesh Reinforcement for finish coat integrity. Milling for reduced Base Interference and simplified install at the Jamb Bottom, for a height of upto 120mm.
Custom Machnining may be added to the Kit. The typical reduces interferences as muc as possible per AGS. Special requests are possible to coordiante.
Any additions may be supplemented to the kit. To include hardware, Door seals, and any other item. The kit is supplied ready to be primed & finished for installation. Finally, THEINVISIBLETOOLBOX may also process an order for a complete door, installed - In designated service locations.
Description
Aluminum extruded, 2 face Open profile. Typically used for Pull Flush Trimless door. A second open face to the rear, offers a wide range of design possibilities to the interior, as well as leaf thicknesses. Suitable for full ceiling height or with a head profile.
Open format allow for a flexible installation:
The Jamb Filler Block is fabricated with the slab (No H.W pre machining required) Hence the frame may be installed prior to finalizing slab hardware & locations.
This X2 face open profile allows creative freedom in on the interior side, per the door, the jamb, and any added tile/cladding.
The Integrated Mesh solution Reinforces the finish coat, on the flush side. Where required, Reinforcement may also be applied to the interior side .
Metal Aluminum
Open, 2 Face, Integ' Reinf' Mesh
Solid Wall, 1/2" Board, 5/8" Board, Add Clad Interior, Simplified Wallbase Install Alt'
Image Coming Soon!
Door Frame Systems
Pull Flush
TPL
Extrusion Material & Format
Door Leaf, Other
Typ 40-65mm M.W Slab, Flexible
Arch' Style
Semi Trimless
Wall Compatibility
Rough Opening (With Brackets)
Light Opening + (62mm+Shim) X Each Side.
Works with Shadowgaps to the interior side.
Quick Note
Image Courtesy: TheInvisibleToolBox.
Exterior side. Image Courtesy: Heep-Turen & Fenster GmbH.
Image Courtesy: TheInvisibleToolBox.
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order. Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
2200 X 1100, Total Ext Frame Length.
2750 X 1100, Total Ext Frame Length.
2750 X 1000 Total Ext Frame Length. No Top Frame Profile.
Kits Include: Bottom cuts, Miter Corner Cuts where top frame is included, Protective Film over rough alum' extrusions, Miter 90 Angle Lock Frame Connectors, Brackets (6-8 per size), Spreader-Bar, 90 Angle Corner Hold, Integrated Mesh Reinforcement for finish coat integrity. Milling for reduced Base Interference and simplified install at the Jamb Bottom, for a height of upto 120mm.
Custom Machnining may be added to the Kit. The typical reduces interferences as muc as possible per AGS. Special requests are possible to coordiante.
Any additions may be supplemented to the kit. To include hardware, Door seals, and any other item. The kit is supplied ready to be primed & finished for installation. Finally, THEINVISIBLETOOLBOX may also process an order for a complete door, installed - In designated service locations.
Description
Aluminum extruded, 2 face Open profile. Typically used for Push Flush Trimless door. A second open face to the rear, offers a wide range of design possibilities to the interior, as well as leaf thicknesses. Suitable for full ceiling height or with a head profile.
Open format allow for a flexible installation:
The Jamb Filler Block is fabricated with the slab (No H.W pre machining required) Hence the frame may be installed prior to finalizing slab hardware & locations.
This X2 face open profile allows creative freedom in on the interior side, per the door, the jamb, and any added tile/cladding.
The Integrated Mesh solution Reinforces the finish coat, on the flush side. Where required, Reinforcement may also be applied to the interior side .
Metal Aluminum
Open, 2 Face, Integ' Reinf' Mesh
Solid Wall, 1/2" Board, 5/8" Board, Add Clad Interior, Simplified Wallbase Install Alt'
Image Coming Soon!
Door Frame Systems
Push Flush
TPS
Extrusion Material & Format
Door Leaf, Other
Typ 40-65mm M.W Slab, Flexible
Arch' Style
Semi Trimless
Wall Compatibility
Rough Opening (With Brackets)
Light Opening + (67mm+Shim) X Each Side.
Works with Shadowgaps to the interior side.
Quick Note
Showing exterior side (Flush & Trimless) Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Showing Exterior - Trimless & Flush. Image Courtesy: Arch' Klaus Marsoner.
Showing exterior side (Flush & Trimless) Image Courtesy: TheInvisibleToolBox.
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order.
Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
To be confirmed - Sizes will be available soon.
Kits Include: Profiles cut, Protective Film over extrusions, Shock absorbing tape, Integrated Mesh Reinforcement for finish coat integrity.
Milling for reduced Baseboard Interference and simplified install at the Jamb Bottom, for a height of upto 120mm may be added to these kits.
Description
Aluminum extruded, Open profile in a Tape On Format. Typically used as a Shadowgap Liner for Pull Flush / Push Flush Windows and Doors. This Profile provides Millwork with an interface for a Mechanically Integrated Finish Reinfircement Mesh. It is Taped over with a shock absorbing strip, and offers a wide range of design possibilities Inclusive of optional combination with other Shadowgaps (TL / TFN) and other Semi Trimless Frames (TPL / TPS) Leaf Thickness is solely dependant on the Jamb Design and Hardware.
Open format allow for a flexible installation.
The Jamb and any blocks may be fabricated with the slab (No H.W pre machining required)
Metal Aluminum
Open, Integrated Reinforcement Mesh
Solid Wall, 1/2" Board, 5/8" Board, No Baseboard Interference
Image Coming Soon!
Door Shadowgap Systems
Pivot, Push Flush, Pull Flush
TR
Extrusion Material & Format
Variable, Window, Other
Flexible
Arch' Style
Shadowgap Liner Profiles
Wall Compatibility
Rough Opening (With Brackets)
Jamb Design Specific
Quick Note
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order. Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
2150 X 1000 Clear Inside Frame.
2400 X 1000 Clear Inside Frame.
2700 X 1000 Clear Inside Frame.
2750 High, Clear Inside Frame. No Top Frame Profile.
3000 High, Clear Inside Frame. No Top Frame Profile.
Kits Include: Bottom cuts, Miter Corner Cuts where top frame is included, Protective Film over rough alum' extrusions, Snap in Miter Lock Frame Connectors, Milling for any standard hardware required (Hinges, strikeplates), Brackets (6-8 per size), Spreader-Bar, 90 Angle Corner Hold, Integrated Mesh Reinforcement for finish coat integrity.
Custom or Typical Machnining, for a Simplified Baseboard Install, may be added to the Kit Order. Typical Machining is applied to the bottom of the Jamb Frame on both sides, upto a height of 95mm. This reduces interferences to simplify the flush base install as muc as possible. AGS may change the specifications of the section parts cleared as it constantly seeks to improve. We are always able to assess custom machining per any particular needs.
Any additions may be supplemented to the kit. To include hardware, Door seals, and any other item. The kit is supplied ready to be primed & finished for installation. Finally, THEINVISIBLETOOLBOX may also process an order for a complete door, installed - In designated service locations.
Description
Aluminum extruded, Riversible format, Closed profile. For Leaf thickness 40mm. (1 9/16" - 1 5/8")
Suitable for Push/Pull Flush, full height, or with a head profile. A Pivot top plate is currently only available for the TST56. Thus, TST40 Pivots are custom, full height applications only. (No header)
Closed format require percise, preditermined installation:
Sections are pre machined for hardware, supplied per order.
Reversible, per both sides equally designed to interface the Reinforcement (Flush Side) & Board Seater (Wall Return)
The Seater may be positioned for a trimless Mud Finish, or deeper to provide room for additionall cladding, Tiles ect.
The Integrated Reinforcment Mesh always protects the finish coat on the Flush Side. Wall Return Side is best detailed with 0-3mm (0-1/8") Reveal, for a perfect appearance.
Metal Aluminum
Closed, Reversible, Integ' Reinf' Mesh
Solid Wall, 1/2" Board, 5/8" Board, Add Clad Interior, Simplified Wallbase Install Alt'
Image Coming Soon!
Door Frame Systems
Push Flush, Pull Flush, Pivot
TST40
Extrusion Material & Format
Door Leaf
40mm M.W Slab
Arch' Style
Trimless
Wall Compatibility
Rough Opening (With Brackets)
Light Opening + (49mm+Shim) X Each Side.
Quick Note
Image Courtesy: TheInvisibleToolBox.
Image Courtesy: AGS-systems.
Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order. Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
2150 X 1000 Clear Inside Frame.
2400 X 1000 Clear Inside Frame.
2700 X 1000 Clear Inside Frame.
2750 High, Clear Inside Frame. No Top Frame Profile.
3000 High, Clear Inside Frame. No Top Frame Profile.
Kits Include: Bottom cuts, Miter Corner Cuts where top frame is included, Protective Film over rough alum' extrusions, Snap in Miter Lock Frame Connectors, Milling for any standard hardware required (Hinges, strikeplates), Brackets (6-8 per size), Spreader-Bar, 90 Angle Corner Hold, Integrated Mesh Reinforcement for finish coat integrity.
Custom or Typical Machnining, for a Simplified Base Install, may be added to the Kit Order. Typical Machining is applied to the bottom of the Jamb Frame on both sides, upto a height of 95mm. This process reduces interferences to simplify the flush base install as muc as possible. AGS may change the specifications of the section parts cleared as it constantly seeks to improve. We are always able to assess custom machining per any particular needs.
Any additions may be supplemented to the kit. To include hardware, Door seals, and any other item. The kit is supplied ready to be primed & finished for installation. Finally, THEINVISIBLETOOLBOX may also process an order for a complete door, installed - In designated service locations.
Description
Aluminum extruded, Riversible Format, Closed profile for Leaf thickness 45mm (1 3/4" - 1 13/16").
Suitable for Push/Pull Flush, full height, or with a head profile. A Pivot top plate is currently only available for the TST56. Thus TST45 Pivots are custom, full height applications only. (No header)
Closed format require percise, preditermined installation:
Sections are pre machined for hardware, supplied per order.
Reversible, per both sides equally designed to interface the Reinforcement (Flush Side) & Board Seater (Wall Return)
The Seater may be positioned for a trimless Mud Finish, or deeper to provide room for additionall cladding, Tiles ect.
The Integrated Reinforcment Mesh always protects the finish coat on the Flush Side. Wall Return Side is best detailed with 0-3mm (0-1/8") Reveal, for a perfect appearance.
Metal Aluminum
Closed, Reversible, Integ' Reinf' Mesh
Solid Wall, 1/2" Board, 5/8" Board, Add Clad Interior, Simplified Wallbase Install Alt'
Image Coming Soon!
Door Frame Systems
Push Flush, Pull Flush, Pivot
TST45
Extrusion Material & Format
Door Leaf
44-45mm M.W Slab
Arch' Style
Trimless
Wall Compatibility
Rough Opening (With Brackets)
Light Opening + (51mm+Shim) X Each Side.
Quick Note
Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Showing wall return side. Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order. Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
2150 X 1000 Clear Inside Frame.
2400 X 1000 Clear Inside Frame.
2700 X 1000 Clear Inside Frame.
2750 High, Clear Inside Frame. No Top Frame Profile.
3000 High, Clear Inside Frame. No Top Frame Profile.
Kits Include: Bottom cuts, Miter Corner Cuts where top frame is included, Protective Film over rough alum extrusions, Snap in Miter Lock Frame Connectors, Milling for any standard hardware required (Hinges, strikeplates), Brackets (6-8 per size), Spreader-Bar, 90 Angle Corner Hold, Integrated Mesh Reinforcement for finish coat integrity.
Custom or Typical Machnining, for a Simplified Baseboard Install, may be added to the Kit Order. Typical Machining is applied to the bottom of the Jamb Frame on both sides, upto a height of 95mm. This process reduces interferences and simplify the flush baseboard install as muc as possible.
AGS may change the specifications of the section parts cleared as it constantly seeks to improve. We are always able to assess custom machining per any particular needs.
Any additions may be supplemented to the kit. To include hardware, Door seals, and any other item. The kit is supplied ready to be primed & finished for installation. Finally, THEINVISIBLETOOLBOX may also process an order for a complete door, installed - In designated service locations.
Description
Aluminum extruded, Riversible Format, Closed profile for Leaf thickness 56mm (2 1/5" - 2 1/4").
Suitable for Push/Pull Flush, full ceiling height, or with a head profile. The TST56 Pivot top plate is designed for rotary hinges and to receive the Reinforcement Mesh.
Closed format require percise, preditermined installation:
Sections are pre machined for hardware, supplied per order.
Reversible, per both sides equally designed to interface the Reinforcement (Flush Side) & Board Seater (Wall Return)
The Seater may be positioned for a trimless Mud Finish, or deeper to provide room for additionall cladding, Tiles ect.
The Integrated Reinforcment Mesh always protects the finish coat on the Flush Side. Wall Return Side is best detailed with 0-3mm (0-1/8") Reveal, for a perfect appearance.
Metal Aluminum
Closed, Reversible, Integ' Reinf' Mesh
Solid Wall, 1/2" Board, 5/8" Board, Add Clad Interior, Simplified Wallbase Install Alt'
Image Coming Soon!
Door Frame Systems
Push Flush, Pull Flush
TST56
Extrusion Material & Format
Door Leaf
56mm M.W Slab
Arch' Style
Trimless
Wall Compatibility
Rough Opening (With Brackets)
Light Opening + (56mm+Shim) X Each Side.
Quick Note
Image Courtesy: Optibois. www.optibois.lu
Image Courtesy: Optibois. www.optibois.lu
Applicable for push & pull. Image Courtesy: TheInvisibleToolBox.
Image Courtesy: Optibois. www.optibois.lu
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order. Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
2150 X 1000 Clear Inside Frame.
2400 X 1000 Clear Inside Frame.
2700 X 1000 Clear Inside Frame.
2750 H X W per request. Clear Inside Frame.
3000 H X W per request. Clear Inside Frame.
Kits Include: Bottom & Top cuts, Top Plate, Protective Film over rough alum' extrusions, Top Plate Connectors, Milling for any standard hardware required (Hinges, strikeplates), Brackets (6-8 per size), Spreader-Bar, 90 Angle Corner Hold, Integrated Mesh Reinforcement for finish coat integrity.
Custom or Typical Machnining, for a Simplified Baseboard Install, may be added to the Kit Order. Typical Machining is applied to the bottom of the Jamb Frame on both sides, upto a height of 95mm. This reduces interferences to simplify a flush base install as muc as possible. AGS may change the specifications of the section parts cleared as it constantly seeks to improve. We are always able to assess custom machining per any particular needs.
Any additions may be supplemented to the kit. To include hardware, Door seals, and any other item. The kit is supplied ready to be primed & finished for installation. Finally, THEINVISIBLETOOLBOX may also process an order for a complete door, installed - In designated service locations.
Description
Aluminum extruded, Riversible Format, Closed profile for Leaf thickness 56mm (2 1/5" - 2 1/4").
Suitable for Push/Pull Flush, full ceiling height, or with a head profile. The TST56 Pivot top plate is designed for rotary hinges and to receive the Reinforcement Mesh.
Closed format require percise, preditermined installation:
Sections are pre machined for hardware, supplied per order.
Reversible, per both sides equally designed to interface the Reinforcement (Flush Side) & Board Seater (Wall Return)
The Seater may be positioned for a trimless Mud Finish, or deeper to provide room for additionall cladding, Tiles ect.
The Integrated Reinforcment Mesh always protects the finish coat on the Flush Side. Wall Return Side is best detailed with 0-3mm (0-1/8") Reveal, for a perfect appearance.
Metal Aluminum
Closed, Reversible, Integ' Reinf' Mesh
Solid Wall, 1/2" Board, 5/8" Board, Add Clad Interior, Simplified Wallbase Install Alt'
Image Coming Soon!
Door Frame Systems
Pivot
TST56Pv
Extrusion Material & Format
Door Leaf
56mm M.W Slab
Arch' Style
Trimless
Wall Compatibility
Rough Opening (With Brackets)
Light Opening + (56mm+Shim) X Side. Top Per H.W
Quick Note
Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
Hover above for Rough Opening. Shim Requirement is Project Specific.
Hover tab below for
Media | Downloads | Support
Hover I below for
Kits & Standards
Typical Standards and Kits
Custom Kits per request are available to order. Extrusion Stick Length Typical: Up to 5.5 Meter runs.
Kits typically offerd to sizes (height X width in milimeters) :
2150 X 1000 Clear Inside Frame.
2400 X 1000 Clear Inside Frame
2700 X 1000 Clear Inside Frame
2750 High, Clear Inside Frame. No Top Frame Profile.
3000 High, Clear Inside Frame. No Top Frame Profile.
Kits Include: Bottom cuts, Miter Corner Cuts where top frame is included, Protective Film over rough alum' extrusions, Miter 90 Angle Lock Frame Connectors, Brackets (6-8 per size), Spreader-Bar, 90 Angle Corner Hold, Integrated Mesh Reinforcement for finish coat integrity, Milling for reduced interference to simplify Base Install at Jamb Bottoms for a height of upto 120mm.
Custom Machnining may be added to the Kit Order. The typical process reduces interferences as muc as possible per AGS. Special requests may be coordinated.
Any additions may be supplemented to the kit. To include hardware, Door seals, and any other item. The kit is supplied ready to be primed & finished for installation. Finally, THEINVISIBLETOOLBOX may also process an order for a complete door, installed - In designated service locations.
Description
Aluminum extruded Open profile frame, for a Push Flush Trimless door, Leaf thickness 44-45mm (1 3/4").
Suitable for full ceiling height or with a header profile.
Open format allow for a flexible installation:
The Jamb Filler Block is fabricated with the slab (No pre machining required) Hence the frame may be installed prior to finalizing slab hardware & locations.
Additionally the open profile allows creative freedom in matching the door slab edge with the jamb, visible together where doors are open.
The Integrated Mesh solution Reinforces the finish coat, on both sides of the frameless opening.
Metal Aluminum
Open, Integrated Reinforcement Mesh
Solid Wall, 1/2" Board, 5/8" Board, Simplified Wallbase Install Alt'
Image Coming Soon!
Door Frame Systems
Push Flush
TUS45
Extrusion Material & Format
Door Leaf
44-45mm M.W Slab
Arch' Style
Trimless
Wall Compatibility
Rough Opening (With Brackets)
Light Opening + (60mm+Shim) X Each Side.
Quick Note
Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Showing bottom with Flush wall base, and matching jamb - door edge. Image Courtesy: TheInvisibleToolBox.
Image Courtesy: TheInvisibleToolBox.
Technical Documents
AGS published Information is available via a pdf document, including Specifications, Installation Guide, Generic Details.
Details by THEINVISIBLETOOLBOX with specific relevance to Canadian Standards, and construction, via pdf.
Support
If you haven't seen exactly what you require, for any application specific , details, CAD files, Sales or Technical Support please contact us.
Call, Email | Submit Form
Hover to Keep Playing
Install Video
GET IN TOUCH
THEINVISIBLETOOLBOX
131 Tyrrel Avenue.
Toronto, Ontario.
Canada. M6G-2G6
Tel: 647.500.4103
​
